FlashForge Guider II

Large Print Volume, Power Loss Recovery, Filament Detect

Sold Out


  • Large Build Volume
  • WiFi Connectivity
  • Heated Build Plate
  • Filament Sensor

Pickup Own Courier - $0.00
Pickup from Office Warehouse, Only available on appointment.

FlashForge Guider II 3D Printer

Large printing, Resume after power failure, filament detection and heated platform. This 3D Printer packs a punch and for the build volume its hard not to consider.

Flashforge Guider II

The frame of the Guider II is built touch and strong and based off the Creator Pro. An already strong and stable unit makes this printers structure perfect for its 68% large build volume.

Guider II Structure and Frame

A heated build platform makes it even more capable of printing larger prints and some other types of filament like ABS.

Guider II Build Platform Heated

WiFi connectivity, LCD Screen and Large Viewing display allows you to naviaget through all the controls with ease.

Guider II Touch Screen


FlashPrint is the standard software that is provided with this 3D Printer and for a free basic slicing package its not short of features. Inlcuding a new feature that allows you to convert 2D to 3D Images.

FlashPrint Software for FlashForge

Offering automatic and manual support structures to be added to your model before 3D Printing, the ability to preview the way your 3D Print is going to be printed and functions that can be modified like temperatures and print speed.

Support Material Structure for 3D Printing

With supports being automaticly generated or manual you can now print using the second nozzle in two material types. Take for example the picture below is printed with PLA and PVA. The concept is that you use the PVA as a temporary support structure then when the 3D Print is finished you can disolve PVA in water, leaving you with you base PLA product.

Support Material Printing Dual Extruder

*12 Months Return to Base Warranty on Parts and Labour. (Please Refer to Details Below)

*The following parts not covered under warranty unless DOA (Dead on Arrival) are Nozzles, Extruder Teflon Lining, Platforms (Except were the Heating element is faulty), Filters and any part considered reasonable wear and tear. Components such as LCD Panels, Buttons, Belts, Bearings, Motherboards, Guide Rails and Rods, Stepper Motors and simular items are covered for the period mentioned above.

Specific Information Regarding Warranty Can be viewed here

FlashForge Guider II Specifications

These specifications have been compiled from a number of sources. It may contain incorrect information. If you notice anything that is wrong please advise us, otherwise we do our best to provide as acurate information as possible.

Print Technology FFF (Fused Filament Fabrication) or FDM (Fused Deposition Modeling)
Build Volume 280 x 250 x 300 mm
Layer Resolution 0.05mm or 50 Microns
Build Platfrom Aluminium Non Removable
Filament Diameter 1.75mm
Filament Compatability PLA, ABS, PETG, TPU, HIPS, PVA
Nozzle Diameter 0.4mm
Physical Dimensions 549 x 490 x 561 mm
Physical Weight 20kg
Software FlashPrint (Works with Simplify3D)
Supported Operating Systems Windows 32 & 64 bit, OSX 10.8+, Linux
Supported File Type STL, OBJ
Power Requirements 110-240V 50-60Hz .2A 350W, AC Input
Connectivity USB, WiFi
Camera No
Single,Dual or Independant Extruder Single
Direct Drive or Bowden Direct Drive
Filament Feed Detection Yes
Power Loss Recovery Yes
Platform Levelling Assisted Levelling

FlashForge Guider II Shipping Specifics

These specifications are used primarily for shipping calculations. If you need exact specifications for any reason please email and we will do our best to advise.

Barcode # 6970152950178
Brand FlashForge
Shipping Weight 38.0000kg
Shipping Width 0.670m
Shipping Height 0.690m
Shipping Length 0.610m
Shipping Cubic 0.282003m3

Be The First To Review This Product!

Help other The 3D Printer users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category