FlashForge Inventor

Powerloss Recovery & Webcam - The upgraded Dreamer

RRP $1,650.00
SAVE $150.00 (9%)
Sold Out


  • Power Loss Recovery
  • Webcam for Timelapse
  • WiFi Connectivity
  • SD Card Reader

Pickup Own Courier - $0.00
Pickup from Office Warehouse, Only available on appointment.

FlashForge Inventor 3D Printer

FlashForge's upgraded Dreamer now called the FlashForge Inventor.

FlashForge Inventor 3D Printer

This 3D Printer not only prints slightly larger with a volume of 230 x 150 x 160mm but it also has a couple of other time saving addons.

Power Loss Recovery

The new power loss recovery is designed to save hours of 3D Printing from being removed and started again by allowing you to resume from a power failure.

Power Loss Recovery on FlashForge 3D Printers

Superflat Aluminium Platform

Its ability to print at 0.8mm or 80 micron layer heights, on an aerospace industrial grade aluminium platform with  a build volume of 230 x 250 x 140 mm makes some of the more difficult types of materials like ABS easier to print.

FlashForge Dreamer Build Platform

Touch Screen and WiFi Connectivty

A hot favorite for Schools because of the standalone 3D printing meaning this 3D Printer doesn't need to be constantly tethered to a computer and its user firendly interface featuring a full colour Touch LCD Screen.

FlashForge Dreamer Touchscreen

The printers connectivity options of WiFi, USB Cable or SD Card makes it a versatile little unit giving the user fleixble options for operation.

Webcam for Monitoring

FlashForge have added a webcam for monitoring of your 3D Printing. Now you can watch your 3D Printer and check the printing process.

3D Printer Camera

Stable ABS and PLA Printing

My two favourite things to mention with this 3D Printer is the fact it has an internal thermostat that monitors the chambers ambient temperature. If the printer exceeds the desired operating temperature on inside of chamber the rear mounted exhaust fans will kick in and extract air so as to ensure the most optimal 3D Printing enviroment possible for your object during the printing process.

Stable 3D Printing 3D Printer Cooling

Software for Printing

FlashPrint is the standard software that is provided with this 3D Printer and for a free basic slicing package its not short of features. Inlcuding a new feature that allows you to convert 2D to 3D Images.

FlashPrint Software for FlashForge

Offering automatic and manual support structures to be added to your model before 3D Printing, the ability to preview the way your 3D Print is going to be printed and functions that can be modified like temperatures and print speed.

Support Material Structure for 3D Printing

With supports being automaticly generated or manual you can now print using the second nozzle in two material types. Take for example the picture below is printed with PLA and PVA. The concept is that you use the PVA as a temporary support structure then when the 3D Print is finished you can disolve PVA in water, leaving you with you base PLA product.

Support Material Printing Dual Extruder

FlashForge Inventor Features

  • Dual Extruder
  • Colour Touch LCD Screen
  • Rear Chamber Extraction Fans
  • Thermister for Temperature Moniotring of Chamber
  • SD Card Slot
  • Fully Enclosed
  • Power Loss Recovery
  • Webcam for Monitoring

*12 Months Return to Base Warranty on Parts and Labour. (Please Refer to Details Below)

*The following parts not covered under warranty unless DOA (Dead on Arrival) are Nozzles, Extruder Teflon Lining, Platforms (Except were the Heating element is faulty), Filters and any part considered reasonable wear and tear. Components such as LCD Panels, Buttons, Belts, Bearings, Motherboards, Guide Rails and Rods, Stepper Motors and simular items are covered for the period mentioned above.

Specific Information Regarding Warranty Can be viewed here

FlashForge Inventor Specifications

These specifications have been compiled from a number of sources. It may contain incorrect information. If you notice anything that is wrong please advise us, otherwise we do our best to provide as acurate information as possible.

Print Technology FFF (Fused Filament Fabrication) or FDM (Fused Deposition Modeling)
Build Volume 230 x 150 x 160 mm
Layer Resolution 0.05mm or 50 Microns
Build Platfrom Aluminium Non Removable
Filament Diameter 1.75mm
Filament Compatability PLA, ABS, PETG, TPU, HIPS, PVA
Nozzle Diameter 0.4mm
Physical Dimensions 467 x 381 x 320 mm
Physical Weight 15kg
Software FlashPrint (Works with Simplify3D)
Supported Operating Systems Windows 32 & 64 bit, OSX 10.8+, Linux
Supported File Type STL, OBJ
Power Requirements 110-240V 50-60Hz .2A 350W, AC Input
Connectivity USB, WiFi, SD Card
Camera Yes
Single,Dual or Independant Extruder Dual
Direct Drive or Bowden Direct Drive
Filament Feed Detection No
Power Loss Recovery Yes
Platform Levelling Manual Adjustment

FlashForge Inventor Shipping Specifics

These specifications are used primarily for shipping calculations. If you need exact specifications for any reason please email and we will do our best to advise.

Barcode # 6970152950192
Brand FlashForge
Shipping Weight 20.0000kg
Shipping Width 0.450m
Shipping Height 0.500m
Shipping Length 0.450m
Shipping Cubic 0.101250m3

Be The First To Review This Product!

Help other The 3D Printer users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category